Industrial washing machine for containers and crates - MEYN POLSKA Sp. z o.o. (formerly NUMAFA POLSKA Sp.z o.o.)

Industrial washing machine for containers and crates - MEYN POLSKA Sp. z o.o. (formerly NUMAFA POLSKA Sp.z o.o.) * The industrial washing machine RWM 600-TL is designed to wash crates and their covers of various dimensions

(via matching the guides to the dimensions of the box). Action: * In the washing machine, dirty crates are transported upside down. The lids of the containers are placed sideways on plastic belt. The washing machine has two sections: main wash and rinse. In the washing section, the washing

water circulates in closed circuit and is cleaned by flowing through a removable filter; * Flushing with clean water takes place in a separate flushing chamber. In the flush section, you can use cold or hot water. The use of hot water in the rinsing process helps the crates dry faster. After use in the section rinsing a

water is recirculated and flows into the main tank. It is possible to drain this water from the machine to drain by

opening the manual valve located downstream of the flush section; * Water losses from the main tank are made up using a float and valve. To protect the pump at the bottom the tank has a switch that turns off the pump if the water level is too low; * The water in the main tank is heated by steam injection. The water temperature is controlled by thermostat located 9

in the control box. Dimensions: * length including table - 5.500 mm; * width - 1.750 mm; * height - 2.300 mm; * height with raised cover - 3.300 mm.

Technical data: * Producer - Meyn Polska Sp. z o.o. (Numafa Polska Sp.z o.o.) - Meyn Netherlands group; * Model - RWM 600-TL; * Machine number - 810528; * Capacity - maximum 600 boxes / hour; * Power supply - 230/400 V - 50 Hz - 11 kVA (3x35 A) - IP 55; * Engine - 0.37 kW; * Main tank capacity - 600 l; * Main pump capacity - 84 m³ / h under 4 bar pressure; * Pump motor power - 15 kW; * Filtering of the main washing water - slot filter, mesh size - 0.75; * Heating of the main washing water - steam injection - total capacity 58 kg / h under a pressure of approx. 3 bar; * Main washing connection - 3/4"; * Main flush connection - 1/2", ball valve; * Main tank water level control - activated: 3/4"; * Water drainage from the main tank - 2.5"; * Machine weight - 1.190 kg; * Month and year of production - October 2000 (the device connected to operation in 2001 worked until 2007); * Execution - stainless; * entrance gate width - 500 mm; * entrance gate height - 420 mm.