The "VERPACO AG" packing machine - model VPS 60 - 380

"VERPACO AG" packing machine - model VPS 60 - 380

The VERPACO AG machine is equipped with the equipment for the production of 40 packages with the product simultaneously. It forms packaging, dispenses milk, cream, lemon and fruit juices, etc. in small portions (10 g), and seals the packaging with the product with a cover foil. It is equipped with hard foil asepsis before and after extrusion of cups and aluminum foil before welding the caps. Cuts out foil surplus in packages and divides plastrons with the product for four 10's. In addition, it has a soft start and stop system to prevent the product from spilling out cups. Dimensions:

- length - 11,500 mm; - width - 1.350 mm + product dispenser - 800 mm; - height - 2.250 mm. Technical data:

- Model - VPS 60 - 380; - Device number - 91265; - Power supply - 3x380 V / 50 Hz / 60 A; - Air pressure - 7 bar; - Capacity - 5-20 cycles / min; - Year of production - 1991; - Construction and housing - stainless steel; - Molds - partly stainless steel and partly tool steel; - Top covers - plexiglass or plexiglass in aluminum housings. Description and photos:

A-1. The main part of the machine from the start side -

B. The initial part of the machine on which the rigid foil is placed and the foil is sterilized in the

bath ultrasonic device before romoting cups from it -

- A-2. The main part of the machine from the end side - - C-1. The final part of the machine, on which the foil surplus is cut and the packages (10 pcs.)

Are wrapped in cellophane foil - - A-3. The main part of the machine - the control room - - A-4. The main part of the machine - the rest of the control room - - A-5. The main part of the machine - the end part of the control room - - A-6. The main part of the machine - PVC foil heating section and cup forming (40

simultaneously) - - A-7. The main part of the machine - the section of sterilization of pressed cups with UV rays (40

simultaneously) - - A-8. The main part of the machine - dispensers in the cup dispensing section (40 portions at the

same time) - - A-9. The main part of the machine - a 40-port product dispenser in the dispensing section (lying

down among others devices) - - A-10. The main part of the machine - the UV sterilization section of the aluminum cover strip - - A-11. The main part of the machine - welding lids for cups with the product (40 simultaneously) - - A-12. The main part of the machine - plastron cutting section with 10-piece product - - C-2. The final part of the machine - the section of cutting 10-sheet foil surplus - - C-3. The final part of the machine - the section of wrapping 10 sheets in cellophane foil.