"The Unipak / Trepko" - Optima dosing and packing unit

"Unipak / Trepko" - Optima dosing and packing unit Team components: a) a driver, frill feeder, feeding the product to the packing machine; b) Unipak / Trepko ASG-30 packing machine with DSG-3 screw feedern; c) a feeder collecting ready-made bags from a packing machine and feeding them to a pass-through control scale; d) Optima in-line checkweigher;

Description of the components of the assembly: A) A ruffled, frill feeder feeding the product to the packing machine Dimensions: * length - 4.000 mm; * width - 750 mm; * height of charge - 1.200 mm; * discharge height - 3,200 mm; * belt working width - 155 mm; * threshold height - 50 mm; * height of side frills - 65 mm; * distance between flights - 200 mm. Hopper dimensions: * length - 950 mm; * width - 750 mm. B) Unipak / Trepko ASG-30 packing machine Destiny: The ASG-30 automatic machine is designed for packing powdered products, such as e.g. flour products, flour potato, powdered milk, ground coffee, desserts, cake concentrates, jelly, chemical products and more. Machine operation: * Forming a bag from a foil tape; * Making a longitudinal seam; * Dosing of the quantity of the packed product measured by the dispenser; * Execution of transverse seams with simultaneous cutting of individual unit packages. Packaging materials used in the machine - heat-sealable films: (a) homogeneous films, such as:

* cellophane (tomophane) weldable on one or both sides; * one or two sides weldable polypropylene; * polyethylene. (b) multi-layer films, such as:

* paper coated with polyethylene or other heat-sealable material; * double-sided coated aluminum foil; * metallized foil (polypropylene or polyamide); * polypropylene - polyethylene; * polyamide - polyethylene; * polyester - polyethylene. and other films that can be sealed. The packaging material, regardless of its type, must be adequately durable and in good condition flexible measure. Its max. thickness deviation is +/- 5%, while the width of the strip with a nominal value of S should have +/- 2 mm tolerance. The material should be evenly wound on the roll.

Technical characteristics: * mechanical performance - from 20 to 100 cycles / min; * operational efficiency - 20 to 90 packs / min. (depends on the packaging material, type of packed product and

portion sizes);

* bag width - 60 - 250 mm; * bag length: 80-350 mm with a single removal; * 250 - 600 mm with double removal; * portion size: max. 4,200 cc with a single pull; * max. 7,000 cc with double pull; * control and drive of the machine - electro-pneumatic; * compressed air pressure - 0.6 MPa; * air demand - from 5 to 15 m3 / h; * power supply –220/380 V - 50 Hz; * power (without dispenser) -8 KVA; * weight (without dispenser and foil) –700 kg; * foil roll; * width max. - 570 mm; * outer diameter - max. 600 mm; * sleeve bore diameter - 68 +/- 5 mm. Dimensions: * length - 1.300 mm; * width - 1.200 mm; * height (without hopper) - 1.600 mm. B1) Screw dispenser of Unipak / Trepko ASG-30 packing machine: * Producer - Unipak / Trepko; * Dispenser type - DSG-3; * Power - 380/220 V * Frequency - 50 Hz; * Operating temperature range - 50 - 300C; * Power - 200 W; * Weight - 150 kg; * Dosing range - 13.5 - 600 g. C) FEEDER RECEIVING READY BAGS FROM THE PACKING AUTOMATIC AND DELIVERING TO THROUGH CHECK WEIGHT Technical data: - Producer - Unipak / Trepko; - Drive power - 0.18 kW; - Power supply - 380 V; - Frequency - 50 Hz. Dimensions: * length - 1.500 mm; * width - 350 mm; * height - 900 mm; * belt width - 200 mm; * flight height - 7 mm; * spacing between flights - 300 mm. D) Pass-through checkweigher Technical data: * Manufacturer - Optima Control Systems GmbH; * Factory number - 1000476; * Type - CC2 - 3003; * Maximum load - 3.750 g; * Minimum load - 5 g; * Accuracy class - x (1); * Value of the legalization plot - e = 0.2 g; * The value of the scale interval - e = 0.2 g; * The smallest graduation - 0.5 g; * Maximum performance - 100 weighings / min; * Maximum conveying speed - 0.43 m / s; * Voltage - 230 V; * Frequency - 50 Hz; * Air pressure - 0.8 MPa; * Working temperature range - 100 - 400C; * Year of production - 1998. Dimensions: * length - 1.300 mm; * width - 760 mm; * height - 1.300 mm.