Continuous flow evaporator PP-02

Continuous flow evaporator PP-02 The device is used to evaporate fish in cans at 920C Dimensions: - Total length - 18,400 mm - Total width - 1,300 mm - Total height - 2.330 mm Technical data: - Producer - Eko-Prod Sp. z o.o., Pruszcz Gdański, Poland; - year of production - 2007; - Type - ZO J09Y11 / 6; - The machine consists of 3 sections: - loading section; - steam section consisting of two segments; - unloading section; - The length of the steam chamber - 12,000 mm; - The width of the steam chamber - 1.270 mm; - From the top, the steam chamber is covered with removable covers (total of 20), and it is closed at the bottom with hinged covers (12 pcs in total); - The walls of the steam chamber as well as the upper and lower covers are filled with heat-insulating material; - The distribution of steam inside the steam chamber is via a steam collector consisting of a central pipe with a cross-section of approx. Ø 60 mm and side loops with a cross-section of approx. Ø 12 mm. Drilled in each side loop There are 9 holes with a cross section of approx. Ø 2. There are a total of 32 in the entire pairing section side loops. Steam is delivered in the central part of the chamber steam between the two segments of the pairing section; - Evaporating temperature - up to 100 °C; - Steam consumption - up to 200 kg / h at p = 0.3 Mpa; - Compressed air pressure - 0.6 Mpa; - Time of passage through the chamber adjustable - 12 - 45 minutes; - Capacity - up to 10,000 cans / h; - Maximum height of a steamed can - 80 mm; - Ladder carrying tape - made of stainless steel rods Ø 8 mm; - Belt width - 1.150 mm; - Spacing between the bars of the tape approx. 25 mm; - Drive power - 4.5 kW; - The whole device is made of stainless steel - type 304; - Operation mode - continuous; - Weight approx. 3,000 kg.