Thursday the 19th - copyright Konsorcjum Andziak - HostingFlow.com

26N (121.24)

NAGEMA - machine for baking wafer sheets

Overall dimensions:

  • total length - 8.200 mm;
  • total width - 1.800 mm;
  • total height - 1.950 mm.

Technical data:

  • size of baking matrix - 490 x 290 mm;
  • power supply - gas burners;
  • number of matrices on the chain - 30 szt.;
  • belt motor power - 3,8 kW;
  • drive - 4-stage reduction gear:
  1. red belt transmission;
  2. built-in reduction gear;
  3. gear reduction wheels;
  4. reduction chain transmission;
  • belt speed adjustable;
  • capacity - 900 pcs./h (with 2-minute baking);
  • weight - 7.300 kg.


25N (121.23)

The device for immersion bath and raw material drip - entirely made of stainless steel

Overall dimensions:

  • total length - 18.500 mm;
  • total width - 1.230 mm;
  • total height - 2.380 mm.

Technical data:

  • belt working length - 18.300 mm;
  • belt working width - 900 mm;
  • belt working length for raw material feeding - 1.400 mm;
  • belt working length for raw material immersion bath - 8.000 mm;
  • belt working length for raw material shower with flashed off (fan) - 1.300 mm;
  • belt working length for raw material drip - 7.800 mm;
  • gearmotor with adjustable speed, motor: 0,25 kW - 1.580 U/min., gear: adjustment range 190/1.000 U/min.;
  • fan - motor: 0,37 kW/2.800 U/min.;
  • immersion bath part - bath with top covera and lids (6 lids on hinges) and side inspection openings (one-side 4 pcs.);
  • shower part - 5 pipes with 5 nozzles each with top cover;
  • blowing part - 2 knife type blowers (slit) on the whole belt width.

 


24N (110.37)

Rotary pocket filler into cans, jars, etc. - MECOM

Technical data:

  • Manufacturer - Mecom;
  • Type - RTS/39;
  • Made in 1996;
  • Fully covered;
  • 4-side entrences;
  • Hinged covers with safety sensors;
  • 39 filling pockets;
  • Equipped for containter - 73 mm;
  • Made of stainless steel.

207 34 k

207 34a k

207 34b k

207 34c k

207 34d k

23N

Insulated, stainless steel chimney Ø 400

There are: chimney basement with three-pad and cleaner, pipes 1,0 meter length (9 pcs.), pipes 0,5 meter length  (2 pcs), mouth, holders.

Technical data:

  • Made of stainless steel;
  • Insulated.

Overall dimensions:

  • Height - ab. 13 m;
  • Diameter - Ø 400/500 mm;

23N k


22N

Palette-box discharger

Overall dimensions:

  • length - 2.250 mm;
  • width - 2.300 mm;
  • height - 2.100 mm.

Inner dimensions:

  • Length - 1.300 mm;
  • width- 2.060 mm;
  • height - 1.050 mm.

233 1a k

233 1 k

The pictures of the machine during reconditioning


21N

Continuous freezer ZURIS - Teps system - ZX 150

Technical data:

  • Manufacturer - ZURIS s.r.l., Italy;
  • Type - ZX 150;
  • Capacity- 150 kg/h*;
  • Number of blades - 6;
  • Compressor - 5 HP;
  • Dasher motor - 3 HP;
  • Pump motor - 1 HP;
  • Power absorbed - 6.8 kW;
  • Line water consumption - 550 l/h;
  • Tower water consumption - 1.300 l/h;
  • Mix inlet temperature - +40C;
  • Standard ice cream output temperature - -60C
  • Maximum ice cream output temperature - -9,20C;
  • Cooling aggregate - gas R 404A;
  • Water condenser.

* Overrun 100% according to the mix used, raw materials, fats, inlet temperature and required finished product. Standard values are referred to mixes having the 15/16% of sugar, the 10/12% of fats, the 9/10% of milk powder, the 0.5 of stabiliers, and total dry components between 36% and 38%.

Overall dimensions:

  • Length - 1.000 mm;
  • Width - 620 mm;
  • Height - 1.500 mm;
  • Net weight - 460 kg.

Other information:

  • You connect the feeding pump to the mix aging tank;
  • You switch dashear and compressor on;
  • After a few minutes Zx 150 is ablte to work at full capacity.
  • Controls on the front panel allow you to adjust the ice cream temperature up to a maximum -9,80C. Przekroczenie można dostosować według własnego wyboru od 50% do 100%.
  • The Teps system controls, automatically, that the maximum hardness of the ice cream is never overcome.

21N k

21Na k

21Nb k


20N

Tomato processing line for tomato paste with a capacity of 200 tons of fresh tomatoes per day with the 2-stage evaporator station MANZINI

Technical data:

  • rmade in – 1978;
  • start up in – 1981;
  • capacity – 200 tons of fresh tomatoes per day;
  • steam consumption for 1 kg of evaporated water – about 0,6 kg of steam at 4 bar pressure;
  • completeness of pretreatment of tomatoes;
  • complete grinding, rubbing and pasteurization of tomato puree;
  • complete evaporator with injector;
  • complete landing at the evaporator column;
  • complete pasteurization of tomato concentrate;
  • cooling system for technological water;
  • set of pumps and piping;
  • User manual in Polish.

1. Threshold conveyor for picking tomatoes from concrete drilling.

20N k

2. Inspection table, roller with water spray - initial part, slanting.

20Na k

3. Inspection table, roller - horizontal part in full.

20Nb k

4. The shredder cuts whole tomatoes together with the separation and rubbing, as well as separating grains and skins from the flesh (after repairs).

5. Pasteurizer of tomato puree.

20Nee k

20Ne k

6. MANZINI 2-stage evaporator for tomato concentrate.

20Ng k

6a. Injector at the evaporator.

6b. Evaporative station with injector.

20Nj k

20Ni k

6c. Flow of tomato puree on the 1st stage of the evaporator (inside the evaporator column).

20Nk k

6d. Conical bottom of the first stage of evaporator station (inside the evaporator column).

20Nl k

6e. Rotating steam coil with the second stage of the evaporator station (inside the evaporator column).

20Nm k

7. Final pasteurization of tomato concentrate.

Overall dimensions:

  • length - 2.330 mm;
  • width - 1.160 mm;
  • height - 1.700 mm.

Machine technical data:

  • Manufacturer - Tito Manzini & Figli, Italy;
  • Type - SOR15;
  • Tank no. - 4716;
  • Pressure - 5 kg/cm²;
  • Nominal temperature - 158,1ºC;
  • Capacity - 57 litrów.

Pump technical data:

  • Manufacturer - C&W. Berges, Germany;
  • Type - RGB 150;\
  • No. - 22913;
  • Motor power - 2,2 kW;
  • Motor turnovers - 1.420 U/min.

20Nn k

8. Technological water coolers.


19N

Belt press AMOS

Overall dimensions:

  • length – 6.646 mm;

  • width – 4.110 mm;
  • height – 5.630 mm.

Technical data:

  • Manufacturer – AMOS GmbH, Germany;

  • Model – APEX 1600;
  • Belt width – 1.500 mm;
  • Belt speed – 0-11 m/min.;
  • Capacity – up to 14 t/h;
  • Min. pressure compressed air – 4 bar;
  • Max. pressure compressed air – 8 bar;
  • Min. belt tension – 4 bar;
  • Max. belt tension – 6 bar;
  • Air usage – 2 m³/h;
  • Belt cleaning water usage – 1.800 l/h;
  • Power supply – 240/400 V;
  • Power – 17,5 kW;
  • Weight – 8.000 kg;
  • Made in 2000.

19N k

19Na k

19Nb k

19Nc k


18N

Screw separator (press) with slot screen RIETZ S-PRESS

Model - RSP-16-K2

It is used for separation of solid parts from different kind of liquids. It can be used as screw press for example for fruit, vegetables, etc.

Overall dimensions:

  • length - 5.750 mm
  • width - 1.000 mm
  • height - 1.600 mm

Dcrew dimensions:

  • length - 2.420 mm
  • diameter - 400 mm

Infeed overall dimensions:

  • length - 760 mm
  • width - 390 mm
  • total depth - 710 mm

Screw adjustable speed.

220 9 k

220 9a k

220 9b k

Zdjęcia urządzenia w trakcie remontu.


17N

Press GLASS, belt width 1000 mm

17N k


16N

Hardening tunnel Hoyer Alfa-Laval

Technical data:

  • Manufacturer- Hoyer S.pA. Via Monferrato 52-20098 San Giuliano Milanese (MI) Italy;
  • Type - markline SCV 512/12;
  • Serial number: 910404;
  • Power supply: 380V, 50Hz, 3 Ph;
  • Power - 3 kW;

16N k

16Na k

16Nb k


15N

Freezer

Technical data:

  • Manufacturer - Gram Equipment Division of Gram AVS, 6500 Vojens, Denmark;
  • type: CF-4-SS.P1EC-AP;
  • serial number: 84-030-1170;
  • made in 1996;

15N k

15Na k


14N

Air heat exchanger AL-KO

Technical data:

  • type - LHIND 400-6KN/B/T/SPEZ
  • working pressure - 16 bar (tested on 32 bar);
  • Fan:
    • motor - 3 phases - power - 0,28 kW; 590 U/min. at the 1st speed; 0,4 kW; 950 U/min. at the 2nd speed.

Overall dimensions:

  • length - 830 mm;
  • width - 730 mm;
  • height - 680 mm;

605 4 k

605 4a kTechnical data:

  • type LH IND 250 - 4KN/B/T/SPEZ
  • working pressure - 16 bar ( tested on 32 bar)
  • fan:
    • motor - 3 phases - power - 0,26kW ; 1420 U/min. at the 1st speed; 0,18 KW; 940 U/min. at the 2nd speed.

Overall dimensions:

  • length - 730 mm;
  • width - 680 mm;
  • height - 570 mm;

605 4b k

605 4c k


13N

Saw with movable table

Overall dimensions:

  • total width – 950mm;
  • total length – 1.100 mm;
  • total height – 1.800 mm.

Working table dimensions and data:

  • width – 650 mm;
  • length – 670 mm.
  • adjustable height of cut product – up to 320 mm;
  • adjustable widht of cut product – up 180 mm;
  • construction – aluminum;
  • parts in touch with product made of stainless steel or plastic.

113 31 k

113 31 k

The pictures of the machine during reconditioning


 12N

Stainless steel cooler with modular belt after blanching

Technical data:

  • There are 9 showers over the belt with 3 nozzles every 300 mm;
  • Motor type - SLh 80-4B2;
  • Power supply - 230/400 V; 50 Hz; 3,5/2,0 A;
  • Motor power - 0,75 kW;
  • Motor turnovers - 1.390 U/min.

Overall dimensions:

  • total length - 4.150 mm;
  • total width - 1.200 mm;
  • total height - 1.570 mm;
  • modular belt length - 4.000 mm;
  • modular belt width - 800 mm.
202 4 k

The picture of the machine before reconditioning


11N

Pallet stacker with hopper bunker "Dodman"

Technical data:

  • bearing capacity - 1.200 kg;
  • engine with transmission;
  • made of stainless steel;

total dimensions with hopper bunker:

  • height - 4.720 mm;
  • depth - 3.100 mm;
  • width - 1.700 mm.

Platform dimensions:

  • width - 1.340 mm;
  • depth - 1.00 mm;
  • maximum pallete height - 2.100 mm.

Hopper bunker dimensions:

  • depth - 2.100 mm;
  • width - 1.700 mm;
  • cone height - 1.780 mm;
  • infeed at height - 2.900 mm;
  • discharge at height - 1.100 mm.

116 62 k

116 62a k


10N

Packing machine in ready cups Ross Inpack Junior A20

Technical data:

  • tray: capacity - 10 cycle/min. = 1.200 pcs./h;
    • 110x140 mm;
    • height - 30 i 40 mm;
  • capacity - ab. 480 kg;
  • possibility of packing in modified atmosphere.

Overall dimensions:

  • length - 2.825 mm;
  • width - 1.450 mm;
  • height - 1.800 mm..

108 109 k

108 109a k

108 109b k

108 109c k

108 109d k

108 109e k

108 109f k

108 109g k

108 109h k

108 109i k The picture of the machine before reconditioning


9N

Water-air washer with scraper TEN BRINK for leaf vegetables
Overall dimensions:
  • length – 4.460 mm

  • width – 1.560 mm
  • height – 2.150 mm

Bath dimensions:

  • length – 4.120 mm

  • width – 1.080 mm
  • height – 1.200 mm

216 43 k

216 43a k

216 43b k

The pictures of the machine before reconditioning


8N

Rotary dosing machine GRUNWALD

Technical data:

  • Type – Rotary 5000/2
  • Motor – 3 kW;
  • Power – 380 V;
  • Number of dosing heads – 2;
  • Number of openings for cups – 24.

Overall dimensions:

  • width – 1.450 mm;
  • length – 1.700 mm;
  • height - 4.100 mm;
  • Hopper:
    • height – 2.750 mm;
    • Motor – 0,75kW;
    • Low speed agitator, manualy lifted.

110 31 kThe picture of the machine before reconditioning

110 31a k

The picture of the machine before reconditioning

110 31b k

Picture of hopper

110 31c k


7N

Root vegetables peeler

Overall dimensions:

  • width - 800 mm;
  • height - 900 mm;
  • Drum diameters:
    • outer diameter - 460 mm;
    • inner diameter - 400 mm;
    • inner height - 200 mm;

Technical data:

  • motor - 0,37 kW;
  • water connection.

203 20 k

203 20a kThe pictures of the machine after reconditioning


6N

Paddle mixer 400 l
 
Overall dimensions:
  • length - 1.800 mm;
  • width - 950 mm;
  • height - 1500 mm.

Chamber dimensions:

  • length - 950 mm;
  • width - 750 mm;
  • height - 800 mm:
  • capacity - 400 l.

104 47 k

104 47a k


5N

Volume dosing machine

 

Doser dimensions:

  • length - 900 mm;
  • width - 600 mm;
  • height - 1.500 mm.

Technical data:

  • Power - compressed air:
    • pressure - 4 bar;
    • capacity Vn = 50 l/min.

110 29 k

Conveyor dismounted

110 29a k

Conveyor dismounted

 110 29b k

The picture of the machine with conveyor


4N

Skinning or filleting machine Baader 603

Overall dimensions:

  • length – 1.765 mm;
  • width – 1.000 mm;
  • height – 1.540 mm;
  • weight – 645 kg.

Technical data:

  • Capacity – ab. 2.500 kg/h;
  • Motor – 4 kW;

801 10 k


3N

Meat grinder C.400-2T-70; WOLFKING - stainless steel

Overall dimensions: 

  • length – 2.160 mm; 
  • width – 1.400 mm; 
  • height - 1.790 mm (including legs length - 320 mm);

Technical data:

  • Discharge diameter – 400 mm;
  • Capacity with frozen meat and meat with bones up to 7 t/h;
  • Capacity with fresh meat up to 25 t/h;
  • Screw turnovers 84 U/min;
  • Power consumption 55 kW;
  • Motor turnovers - 1.400 U/min.;
  • Weight – 2.800 kg.

105 33a k

105 33 k


 2N

Meat grinder C-250 - 250 mm; WOLFKING

Technical data:

  • General:
    • Manufacturer – Wolfking WILLIAM JENSEN maskinfabrik, Denmark;
    • Type – C 25-RS;
    • No – 23065;
    • Made of stainless steel;
    • Discharge diameter – 250 mm;
    • Weight – 1.600 kg.
  • Electric:
    • Motor power – 22 kW;
    • Power supply – 380 V/50 Hz/3 fazy;
    • Motor turnovers – 1.400 U/min;
    • Screw turnovers – 150 U/min.
  • Capacity:
    • for fresh meat – up to 10 t/h;
    • for frozen meat – up to 4 t/h.

Overall dimensions:

  • length – 1.575 mm;
  • width – 1.050 mm;
  • height – 900 mm.

105 34 k

105 34a k

The pictures of the machine after reconditioning


1N

Pasteurizer/Sterilizer WSA 7

Technical data:

  • tank capcity – 3,41m3
  • basket capacity – 0,37 m3
  • number of baskets for one input – 4 pcs.;
  • tank pressure – 4 bar;
  • check temperature - 151 °C;
  • sterilization temperature – up to 132 °C;
  • water temperature on entrance to heat exchanger – 10 - 12 °C;
  • steam temperature on entrance to heat exchanger - 164 °C;
  • water pressure into heat exchanger – 6 bar;
  • steam pressure into heat exchanger - 6 bar;
  • air pressure into the tank – 4 bar;
  • air pressure for controls – 6 – 8 bar;
  • water consumption – ab. 0,4 m³ / 8 h;
  • average steam consumption – ab.400 kg/h;
  • maximum steam consumption during heating process – ab. 1.500 kg/h;
  • cooling water consumption – ab.7 m³/cyle
  • power – 4 kW.

Overall dimensions:

  • length – 4.670 mm;
  • width – 2.016 mm;
  • height – 1.950 mm;
  • Weight – 3.923 kg.
106 9 k

106 9a k

Dru Samia Jersey Filip Forsberg Jersey